Sav 10 clients not updating 100 dating woman

I use a Perl script as a daemon with LWP module to poll/parse the web interface of my DSL modem/router every 5 minutes and it logs to syslog hourly.

sav 10 clients not updating-61sav 10 clients not updating-55sav 10 clients not updating-11sav 10 clients not updating-57

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage:

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage:

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: [[

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

]] " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: [[

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

]] " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

" exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: [[

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

]] " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

" exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: [[

Updating every 30 minutes via /dev/eth0 with NAT enabled.

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!

/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?

Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.

The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.

||

Updating every 30 minutes via /dev/eth0 with NAT enabled./etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### ####################################################### #!/etc/rc.d/init.d/functions # uncomment/modify for your killproc case "$1" in start) echo "Starting noip2." /usr/local/bin/noip2 ;; stop) echo -n "Shutting down noip2." killproc -TERM /usr/local/bin/noip2 ;; *) echo "Usage: $0 " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

]] " exit 1 esac exit 0 ####################################################### Guys I don't see that its working after installing everything and letting one day (after reboot) The date now: 19/DEC/2012 NO IPs Last Update: 2012-12-17 PST How can I debug to see whats wrong?Author: Brian Huneycutt, Software Engineer, Enterprise Client and Mobility One of our top requested Configuration Manager features is the ability to automatically update our own client.The framework for doing so was put in place with Service Pack 2 for System Center 2012 Configuration Manager, and Service Pack 1 for System Center 2012 R2 Configuration Manager.Note that the client version displayed on the Automatic Client Upgrade tab of the Site Settings Properties dialog box will not change with the installation of a cumulative update.

803

Leave a Reply